SixVolts/GLM-5.3-Flash-ewaste-edition-GGUF

GLM-5.3-Flash — "e-waste edition" GGUF

This is a quantization of GLM-5.3-flash that is optimized to work better on older hardware. This quant was built using i-matrix GGUF quantizations with the same principle as the GLM-5.2 and GLM-5.3 e-waste editions: K-quants for the routed experts, no codebook i-quants, because on pre-AVX-512 CPUs and previous-generation datacenter GPUs (MI100 / gfx908) expert dequantization, not bandwidth, is the decode bottleneck.

Format: mainline llama.cpp glm5-next (merged 2026-09-30, ggml-org/llama.cpp#27773). These files do not load in builds that only know the earlier glm5next arch from the unmerged PR #27754 (unsloth's September files are that format). Any llama.cpp from 2026-10 on loads them. The NextN/MTP head (blk.45) is in every file for when mainline's MTP support (#27917) lands.

Available quantizations

Variant	Size	Routed experts	Non-experts	Target
GLM-5.3-Flash-Q4_K_XL	173.7 GiB	Q4_K	Q8_0	Highest quality; 8×24 GB, 192 GB unified memory
GLM-5.3-Flash-Q3_K_XL	136.1 GiB	Q3_K	Q8_0	6×24 GB
GLM-5.3-Flash-Q3_K_M ⭐	129.4 GiB	Q3_K/Q4_K hot + Q2_K cold (blk.4–20)	Q6_K, KDA q/k/v/o Q5_K	6×24 GB with room for context
GLM-5.3-Flash-Q2_K_XL	104.4 GiB	Q2_K	Q5_K	128 GB unified memory, 5×24 GB; lowest quality
mmproj/mmproj-GLM-5.3-Flash-F16.gguf	1.1 GB	—	—	vision tower (glm5v), use with --mmproj

All are imatrix-quantized with unsloth's GLM-5.3-Flash importance matrix (88 chunks × 9216 tokens) from an F32 intermediate of the FP8 checkpoint (fp8 × block scale in F32; a BF16 intermediate re-rounds most weights because the scales are arbitrary floats). Tensors that mainline's quantizer keeps unquantized for this arch (hyper-connection mixers, DSA indexer, KDA gates/betas, attn_kv_a_mqa) are F32 in every file; attn_q_a/q_b and nextn.eh_proj are Q8_0 (mainline's floor). The MTP head's experts are Q4_K in every variant.

Why this isn't just the GLM-5.3 recipe scaled down

Two things about Flash are different from the 745B model, measured on this box:

1. The cold tail is short. On GLM-5.2/5.3 the imatrix activation energy of the expert layers spans six orders of magnitude, so 32 early layers could take Q2_K almost for free. On Flash the spread is ~50× and the cost of Q2_K rises steeply after blk.20: Q2_K on blk.4–20 costs +0.037 KL in total; extending it to blk.28 costs another +0.075 for only 7 GiB saved (see the table below). The Q3_K_M cut is therefore blk.4–20.
2. Per-token bandwidth is dominated by the non-expert weights. The 9 B non-expert parameters (mostly the 34 layers of KDA q/k/v/o projections) are read every token: 9.6 GB/token at Q8_0 against 4.9 GB/token for the eight active experts. Q3_K_M and Q2_K_XL therefore carry Q6_K / Q5_K non-experts — a ~2 GiB file-size difference that is worth ~20% of decode bytes. Measured twice (two expert layouts): KDA projections at Q5_K instead of Q6_K change KL by <0.001 (0.2628 vs 0.2632; 0.188 vs 0.189), so Q3_K_M and Q2_K_XL use Q5_K there.

Quality (perplexity, KL divergence)

wikitext-2 test, 100 chunks × 512 tokens, f16 KV cache, -fa off, mainline llama.cpp 4ebdf2c, 10× MI100. KL divergence is against our Q4_K_XL (4096-token chunks, 49k tokens).

Quant	Size	PPL ↓	KL vs Q4_K_XL (mean / median)	top-1 agreement
unsloth UD-Q4_K_XL (reference)	185.9 GiB	3.3038 ± 0.042 †	—	—
Q4_K_XL	173.7 GiB	3.3105 ± 0.043	—	—
Q3_K_XL	136.1 GiB	3.6015 ± 0.047	0.152 / 0.030	87.7%
Q3_K_M	129.4 GiB	3.7038 ± 0.049	0.188 / 0.042	86.0%
Q3_K_M with Q6_K KDA projections (not published)	129.9 GiB	3.6855 ± 0.049	0.189 / 0.041	85.9%
Q3_K_M with Q2_K to blk.28 (not published)	123 GiB	4.0427 ± 0.055	0.263 / 0.061	83.1%
Q2_K_XL	104.4 GiB	4.6112 ± 0.065	0.378 / 0.095	79.5%

† measured on a different llama.cpp build (the glm5next fork that can load that file); our Q4_K_XL measures 3.3099 on that same build, so the two are equal within error at 12 GiB less.

Speed on the author's box (10 × MI100, gfx908)

Measured with a fork of llama.cpp that carries this model under the earlier glm5next arch name (header re-keyed, same tensors), llama-bench -p 2048 -n 128, no speculative decoding: Q4_K_XL 780 t/s prefill / 33.8 t/s decode, Q3_K_M 730 / 32.2. The 3-bit file is not faster than the 4-bit one here even though it reads fewer bytes — 2/3-bit K-quant dequantization costs more per block on this GPU class, which is exactly the trade the e-waste editions make (and why there are no i-quants). Mainline llama.cpp runs this architecture at roughly 11 s per 512-token perplexity chunk on the same cards.

Usage

# Q3_K_M — six 24 GB cards (first shard loads the set)
llama-server -m GLM-5.3-Flash-Q3_K_M-00001-of-00004.gguf -sm layer -fit on -fa off -c 32768

# with images
llama-server -m GLM-5.3-Flash-Q4_K_XL-00001-of-00005.gguf --mmproj mmproj-GLM-5.3-Flash-F16.gguf -fa off

-fa off is required for this architecture at the time of writing. Sampling per Z.ai: temperature 1.0, top-p 0.95.

Credits / provenance

• Base model: GLM-5.3-Flash by zai-org (FP8 checkpoint, revision eb9eb208).
• Importance matrix: unsloth/GLM-5.3-Flash-GGUF imatrix_unsloth.gguf_file (not redistributed here).
• llama.cpp glm5-next support: ggml-org/llama.cpp#27773 (timkhronos).
• Quantized with llama.cpp convert_hf_to_gguf.py --outtype f32 and llama-quantize --imatrix --tensor-type-file.